Big Rig Drifting!

Ryan Fadera of R.A.D. Experience will tandem with Mike Ryan with his big rig on February 28 for a movie. Mike Ryan is a 9 time Pikes Peak champion

Watch this big rig Drift!!!

Results of Formula Drift Yas MArina

After waking up early morning Pacific time just to watch the event, here are the results of Formula Drift Yas Marina:

Congratulations to

1st place: Fredric Aasbo

2nd place: Chris Forsberg

3rd place: Tanner Foust

Formula Drift @ Yas Marina Circuit

Wanna watch Formula Drift @ Yas Marina Circuit live???

Log onto

http://www.formulad.com/live/
5A.M. PST / 8A.M. EST
FEB. 25, 2011 



Watch live video from driftstream on Justin.tv

Video of the Week 71.6: Formula Drift Long Beach 2011 Promo Video

Here we go, get ready for Round 1!!!

Video of the Week 71.3: Formula Drift Commercial-Runblox.com

Getting stoked for this season!!! You guys ready for round 1???

Video of the Week 71: Formula Drift on Marina Circuit

Team RAD

Name: Ryan Fadera
Vehicle: 1991 Nissan 240sx

Under the hood:
• Sr20DET redtop with:
• bc 272 cams
• bc springs retainer
• psm rocker arm stoppers
• cosworth 1.2 metal headgasket
• cp 87mm pistons
• acl race bearings
• stock rod
• arp head studs
• Sard 850 cc injectors
• FMIC with HKS sqqv bov
• Z32 maf
• Kn&n Air filter and breather
• Greddy oil catch can
• Greddy oil cooler
• Nismo motor mounts
• R.A.D. Experience custom engine torque damper
• R.A.D. Experience custom 3 inch straight pipe exhaust (rain catcher series)
• Apex SAFC2
• motor was blueprinted and built at srmotorcars by Steve Rogers
• engine tuned at Drift Speed by Koji and Yoshie

Drivetrain:
• ACT 3 puck spring loaded clutch with light weight flywheel
• R.A.D. Experience Welded differential
• B&M short shifter

Suspension:
• Megan streets coilovers
• Megan tension rods
• Megan rear upper control arms
• Megan toe rod
• Megan traction rod
• Steering angle modification

Exterior:
• Front and rear bash bars and tow attachment
• BN Sports aero
• Old school VIS wing
• VIS Carbon fiber hood
• 5zigen FNOIRC 17x9’s

Interior:
• Sparco sprint seat
• Sparco four point harness
• White 330 Nardi
• Greddy shift knob
• Aem Uego
• Broadway 240cm rear view mirror
• Gutted interior
• Rear Optima battery relocation
• FD spec custom roll cage


Name: Richard Fadera
Vehicle: 1991 Nissan 240sx

Under the hood:
• Gangster stock KA24DE that passes smog
• R.A.D. Experience custom 3 inch straight pipe with jdm tip

Drivetrain:
• ACT 3 puck spring loaded clutch with light weight flywheel
• R.A.D. Experience Welded differential
• B&M short shifter

Suspension:
• Megan streets coilovers
• Megan tension rods
• Megan rear upper control arms
• Megan toe rod
• Megan traction rod
• Steering angle modification

Exterior:
• Front and rear bash bars and tow attachments
• BN Sports aero
• VIS Carbon fiber hood
• 5zigen FNOIRC 17x8’s

Interior:
• Sparco sprint seat
• Four point harness
• 350 mm steering wheel
• Razo shift knob
• Broadway 240mm rear view mirror
• Some interior
• FD spec custom roll cage


Name: Carlo Jacinto, aka: Chu
Vehicle: 1989 Nissan rps13

Under the hood:
• Sr20det
• Custom high mount intercooler
• Aluminum Koyo Radiator
• Blitz SUS intake
• Frankenstein oil cooler.(Grex,russell,BM,etc.)
• Blitz Down pipe
• Sonic motor exhaust

Drivetrain:
• RAD Experience Welded diff!!.
• Sr drive shaft
• ACT 6 puck, stage 4 clutch

Suspension:
• RSR intellegence coilover
• Tien inner/outer tie rod
• Meagn Rucas
• Megan tension rods

Exterior:
• Origin Front Bumper
• Origin Side Skirts
• VIS CF hood

Interior:
• Bride Bucket Seats (rep)
• Custom Roll Cage
• Autometer Oil, boost, water gauge
• hks auto timer
• NRG 2.0 quick release, momo hub, nardi wheel
• Pioneer head unit


Ramon Hernandez
Vehicle: 1991 Nissan 240sx

Under the hood:
• Stock rebuild sr20 with:
• s15 t28
• 550 cc injectors
• z32 maf
• V mount intercooler
• power fc ecu tuned by mr luis

Drivetrain:
• Welded diff

Suspension:
• Powerbymax coilover
• Pbm arms
• Pbm steering angle

Exterior:
• Dmax ver 3
• Works vsxx 17x10 17x11

Interior:
• Full interior
• Roll cage


Name: Mikko Eustaquio
Vehicle: 1992 Nissan rps13

Under the hood:
• sr20DET red top
• s15 t28 turbo
• Tomei exhaust manifold
• Megan racing turbo outlet/70mm downpipe/type2 catback
• cx racing front mount intercooler
• hks ssq blowoff valve
• battery relocation w optima battery

Drivetrain:
• ACT 6 puck stage 2 clutch
• R.A.D. Experience welded differential

Suspension:
• Tein super drift coilovers
• Tanabe front amd rear strut bars
• Tein tie rods and tie rod ends
• Megan racing tension rods
• Megan racing rear upper control arms

Exterior:
• 17x10+12 fn01rc wheels
• Vis front bumper
• Chargespeed front 25mm widebody fenders
• Chargespeed rear 30mm widebody fenders
• Vis sideskirts
• gp01 rear bumper
• red wine pearl paint job/ black top

Interior:
• Nardi steering wheel
• Nismo shift knob
• Recaro replica carbon kevlar bucket seat
• Pagglia racing 8 point roll cage
• 5 point racing harnesses


Name: Joshua Kellman
Vehicle: 1991 Nissan 240sx

Under the hood:
• Gangster Stock KA24DE that does not pass smog
• Apex dual tip exhaust

Drivetrain:
• ACT 3 puck spring loaded clutch
• R.A.D. Experience Welded differential

Suspension:
• Tein HR coilovers
• Megan tension rods
• Megan rear upper control arms
• Megan toe rod
• Megan traction rod
• Steering angle modification

Exterior:
• I make oem steelies gangsta flush (seriously)

Interior:
• Five point harness
• Some interior
• FD spec custom roll cage in the works

Video of the Week 70: Team TS Power: Russia Drift